Novedades

Qué cambió en cada versión.

Todas las versiones de Lumen PSX y lo que trajo cada una, leído en vivo del CHANGELOG.md del proyecto (en inglés). Para tener la más reciente, instala o actualiza desde este sitio.

0.20.0

ÚltimaVersión en GitHub

Connections: Wi-Fi, Bluetooth controllers and a USB network cable, from RAM, and the console's kernel: which one runs, and putting Sony's back so all of it works. Verified on the console: SDL3 runs Lumen; the kernel restore (Project Eris v47 to Sony's) with its full backup first; on Sony's kernel the network modules load. Not yet tried with real Wi-Fi / Bluetooth / Ethernet adapters.

Added

  • Settings, Connections: switches for Wi-Fi and Bluetooth, the networks in range (the password on the on-screen keyboard, only its WPA hash kept on the stick), Bluetooth controllers (search, pair with no PIN, forget), a USB Ethernet adapter that connects by itself, and the clock set over the internet. The settings rail fits nine sections.
  • Settings, About, Kernel: shows the running kernel (Sony, Project Eris v47, ModMyClassic 2019, other). On one that is not Sony's, it can put Sony's back from the console's own recovery partition: a full read-only firmware backup first (also on its own, Square), the current kernel copied to the stick, the write checked and undone at once if it does not match, and a way back to the previous kernel. The only place Lumen writes the internal memory; while it is being proven on more consoles it needs the file lumen/kernel-write-ok on the stick. Recovery guide: https://lpsx.dev/recovery
  • The on-screen keyboard has a symbols layer (Shift: A, a, #+=) and longer texts.

Changed

  • SDL3 3.4.20 with sdl2-compat runs Lumen on the PSC compositor (psc-platform 2.5.0): the same SDL2 calls, newer controller support. If Lumen shows no picture with it, the next start uses SDL 2.0.4 again by itself; sdl=stock in settings.ini turns it off.
  • POWER waits while the kernel is being written.

Platform

  • psc-platform 2.5.0: psc-sdl3, psc-net, psc-bt and psc-netmod-stock ship in lumen/compositor/.

0.19.0

Versión en GitHub

Less stutter: at start-up, on the dashboard, with a menu open and in the launch. Verified on the console through five rounds of test builds (logs with debug/perf): start-up 2072 ms -> about 800 ms, no more frames of 0.2 to 0.9 s when the selection moves to another system, the settings at 60 fps instead of 31 to 50. Not yet timed on the console: the game menu with the last change to the cards, and the start-up with the last two reads moved off the main thread.

Changed

  • Start-up: the library, the launch declarations of every system, the interface's icons and the saved selection are read from the stick on a thread while the splash plays, and the audio device opens on another. The logo's fade and fill and "Loading" animate at the display's rate instead of a few times a second, and the animation no longer adds its own 0.65 s to every start. The splash then stays until the covers on screen and the background are in (0.7 s at most) and dissolves into a finished dashboard.
  • Nothing reads the stick on the main thread while the dashboard runs. A file on the stick goes through its FUSE daemon and a question to it waits while the stick is busy: the launch declaration read when the selection settled on another system (250 to 860 ms on the console), a help bar set's icons the first time it showed, the settings asking every frame whether the compositor package exists, the free space of the About page.
  • Fonts are read once into memory: a new title or letter no longer reads the stick in the middle of a frame.
  • An open menu costs the GPU half as much, same picture (to 2/255): its scrim is folded into the frame under it by the shaders instead of drawn as a full-screen layer (scrim_fold=0 draws it), and inside a glass card the fill and the shadow under it are one layer (card_merge=0).
  • Launch: the game's art is painted into the illustration and its texts are made once the selection settles, on a thread, not on the frame Play is pressed; the field that opens the launch hides the dashboard from the GPU as it grows.
  • L1 / R1 land on a page whose covers are already there (the next and previous pages are decoded ahead; covers stay in a 32 MB cache), and a game's background is ready sooner (the last three decoded are kept, the next game's is decoded ahead).
  • The help bar's sets are made when first shown (start-up: 722 ms -> 19 ms on the console).
  • debug/perf logs every frame over 25 ms with what it was made of (perf: slow frame), where the main thread was when a frame hung over 150 ms (perf: stuck at, addresses for addr2line on the unstripped build), a line per start-up step (boot:), how long the dashboard took to be ready under the splash, and the backgrounds' and the launch art's times.

0.18.0

Versión en GitHub

Native ports of PlayStation games, USB transfer between two sticks, the library check, and record mode. Checked in psc-sim only: nothing of this release has been verified on the console yet (released so on purpose: there is no adapter at hand for a second USB drive). In the simulator: the native ports (listing, chip, launch), the transfer (browse, copy both ways, stop, the drive vanishing mid-copy, not enough space, the FAT32 4 GB limit, delete, the offer, Settings) and the library check (a library broken on purpose, LibCrypt images, a case-sensitive disk). Not verified on the console: detecting and mounting a real second drive, remounting it writable, power drop-outs on the front ports, a real native port started from Lumen, and the cost of the native-port launch on the console's GPU.

Added

  • Native ports of a system's games. A game recompiled to run on the console itself (no emulator) goes in <root>/games/<id>-native/<name>/ (games/psx-native/ for the PlayStation; [library] ports in the declaration), in the layout of a homebrew app (app.ini, the program, cover.png), and is listed among that system's games like any other, not under Homebrew. Its tile carries a "Native port" chip, and its launch is its own (lumen-design guidelines/06, "Launch: a native port"): the PlayStation takes the disc as always, then charges up: energy runs along its edges, an aura builds, arcs flicker, it shakes, rises on a shockwave and the energy floods the frame (3.4 s). A system without an energized machine shows the cover as a card that switches itself on. It starts as a program (kind=app); graphics levels, the CRT filter and attract-mode demos do not apply to it.
  • Record mode, for videos made in a simulator: LUMEN_RECORD=<file or fifo> makes time advance exactly 1/LUMEN_RECORD_FPS (default 60) per presented frame and appends every frame as raw RGBA; scripted inputs and screenshots follow that clock; LUMEN_RECORD_SECONDS ends the run. Normal runs are not affected.
  • USB transfer: copy files between the Lumen stick and a second USB drive with the pad (docs/usb-transfer.md; lumen-design usb-transfer*.html). Plugging a second drive in shows a pill on the Home for 8 s (Square opens the transfer; nothing opens by itself), and Settings, Library has "Transfer files". One card with two panes, one per drive: Left / Right change pane, Cross opens a folder or marks a file, Square marks, Start copies what is marked to the other drive, Triangle opens the options. The destination is the folder open in the other pane or, on the Lumen stick, the games folder of any system declared in systems/. Both directions.
  • The copy runs on its own thread with a progress card (bytes, file count, time left) and can be stopped. Free space is checked first; files already on the destination with the same size are skipped, so a copy cut short can be repeated. Each file is written as <name>.lumen-part, flushed and renamed; the second drive is mounted read-only and is writable only while it is the destination. A drive that disappears mid-copy ends the copy with a message and the unfinished file is removed. After a copy to the Lumen stick the library is rescanned.
  • Library check: Settings, Library, "Check library" (docs/library-check.md; lumen-design library-audit.html). It reads every system declared in systems/ and lists, game by game, what keeps a game from being listed or from starting: a folder without Game.ini, a Game.ini without Discs= or naming a disc that is not there, a .cue or .m3u that points to a missing file (or writes its name with other capitals on a case-sensitive stick), empty files, a .bin without its .cue, an empty game folder, a system whose core is missing, a homebrew app without app.ini or its program, an unfinished copy, an .sbi that is not named like its disc, and a LibCrypt-protected disc without its .sbi: the serial is read from the image (SYSTEM.CNF) and looked up in systems/psx.protected (197 serials, from PSX Data Center's SBI list). The native ports folders are checked too, with the rules of homebrew apps. Each problem shows the file and the folder. Read-only; the scan runs on its own thread.
  • USB transfer, Triangle: options. "Eject USB", and "Delete N items" for what is marked on either drive, after a confirmation (Cancel focused). Lumen's own folder cannot be deleted.
  • LUMEN_USB2=<folder> makes a folder play the second drive (psc-sim) and LUMEN_USB2_KBPS=<n> slows the copy down, to test the flow without hardware.

0.17.0

Versión en GitHub

Interface sounds. Checked in psc-sim (the sim has no audio output: the sounds were reviewed from LUMEN_SFX_DUMP) and on the console.

Added

  • Interface sounds on the dashboard, Settings, the game menu and the keyboard (lumen-design guidelines/06 "Sound"): a tick per move, a soft wooden tap for a system (higher for the next, lower for the previous), two quick taps for a page, short notes for open / back / confirm / play. Synthesised at start like the launch clicks, no sound files; up to four at once. Nothing sounds when nothing moved, during the screensaver or during the launch.
  • Settings, Sound, "Interface sounds" (on by default, setting ui_sounds); the Volume of that page scales them. The launch click plays either way.
  • LUMEN_SFX_DUMP=<dir> writes every effect as a WAV, to review them or put them on a video.

0.16.0

Versión en GitHub

The first start asks for the language. Checked in psc-sim only; not yet verified on the console.

Added

  • On a new install (no settings.ini yet) the welcome opens with a language page: every installed language in its own name, Up / Down to pick, Cross to apply it. The presentation that follows is already in the chosen language. The page is shown even when the presentation is hidden, and only once: the answer is stored as language_asked = 1. Existing installs are not asked (a settings.ini without the key counts as answered).

Changed

  • The default language is English (language = en, was es). It is the one focused on the language page.

0.15.0

Versión en GitHub

Flat launch animations. Checked in psc-sim only; not yet verified on the console.

Changed

  • The launch animations are flat illustrations instead of 3D models (launch = flat, the design of lumen-design's "Launch: flat"). A field of the game's colour wipes over the dashboard, the system's machine drops in and floats, and its medium goes into it: the disc under the PlayStation's lid (no jewel case any more), the cartridge into the slot of the Nintendo 64, Super Nintendo and Mega Drive, through the front door of the NES, into the back of the Game Boy, Game Boy Advance and PSP, the coin into the arcade cabinet. A machine with a screen lights it up in the tones of the game's cover and the screen grows into the frame; the others light their lamp and hop. No white flash before the fade. The cover on the medium is painted in five flat tones of its own palette. Every layer is one textured quad: no models, no depth buffer.
  • A system without an illustration (homebrew apps, a minimal declaration) gets the generic launch on the same field: the game's cover as a card that floats, turns once and grows into the frame (docs/systems.md, "The launch").

Removed

  • The 3D launch: the jewel and keep cases, the cartridges and consoles as models, the coin and "INSERT COIN / CREDIT 1", the white flash, their shaders, the multisampled target of the scene and the warm-up of all of it at start-up. assets/models/ (2.3 MB) and tools/models/ are gone; src/main.c is 1,300 lines shorter.
  • Declaration keys that only that renderer read are ignored: [media] shape, aspect, color, art, media_art and [animation] launch, slot, idle. A game's own disc or cartridge picture is no longer read. The settings msaa and scene_aa are ignored: the window has no multisampling.
  • Assets nothing loaded: the pixel-art button icons (assets/icons/, superseded by assets/glyphs/; tools/make-icons.py) and the brand's logo.png and mark.png (their SVG sources stay).

0.14.1

Versión en GitHub

The POWER button works: it suspends the console and brings the session back.

Fixed

  • POWER suspends the console (red LED) and POWER again resumes the Lumen session; it was ignored since 0.3.0 because the session did not come back. Cause: Sony's power manager unmounts the USB stick before it suspends, and at the resume the kernel disconnects the stick and finds it again a few seconds later, while Lumen's session scripts and its button daemon ran from the stick and kept logs open on it. Now boot.sh, run.sh, power.sh and lumen-buttons run from copies in RAM (/tmp/lumen-run) and log there (logsync.sh appends the logs to the stick); power.sh suspend closes the game (saved) and the frontend, writes the logs out and unmounts the stick; power.sh resume waits up to 20 s for the stick (sda1 / sdb1, label SONY*), mounts it and only then starts the compositor and the frontend. If the stick does not come back the console restarts instead of staying on a black screen. Verified on the console with a FAT32 stick (three suspend / resume cycles); not tested with an exFAT stick. An empty file lumen/debug/no-power-suspend on the stick turns it off (POWER ignored, everything runs from the stick as before). lumen/logs/suspend.log records every suspend and resume step.
  • The power LED no longer stays orange during a Lumen session: Sony's start-up leaves the red LED on next to the green one and nothing turned it off; boot.sh now does.

0.14.0

Versión en GitHub

Menus that speak the dashboard's language, and a generic launch animation for systems whose hardware Lumen does not know. Checked in psc-sim and built with the console toolchain; not yet verified on the console.

Added

  • Generic launch animation, launch = cover: the game's cover turns once about itself with a halo of its accent colour and flies into the camera. It is now the fallback for every system that declares neither [animation] launch nor [media] shape, instead of a made-up cartridge and console (or a CD case). Homebrew apps use it (they were shown as a HuCard going into a PC Engine). Systems with a declared shape keep their hardware animation.

Changed

  • Menus redesigned to follow the dashboard's language (design source: lumen-design): every menu is a glass card over the dimmed game art, the focus is the same white ring as on the tiles, and no selection is a filled bar of colour any more.
  • Settings: no longer an opaque full-screen list. The status row stays, the sections are a rail on the left and the focused section is already open in a card on the right (Cross / Right enter it, Circle / Left go back, Triangle closes). The Profile card shows the avatar, the name and the games played.
  • Game menu: a card on the right, so the focused cover and its title stay visible; "Play" is a white primary button.
  • File picker, on-screen keyboard and confirm dialogs: same cards, ring and buttons; the destructive answer is tinted, never filled.
  • src/ui.c: the shared components (scrim, card, ring, focus, kicker, text fitting).
  • The settings no longer clear the screen to a flat colour: the art keeps drawing under them (one more blended full-screen pass; to be measured on the console). Theme keys pill and panel are no longer used by these menus.
  • Checked in psc-sim at 720p only; the in-game pause dialog still has the old look.

0.13.0

Versión en GitHub

A picture for your profile, picked from the stick, and a dashboard whose focus moves up to the system tabs and the profile. Checked in psc-sim and built with the console toolchain; not yet verified on the console.

Added

  • Profile avatar from a picture: Settings > Profile > Avatar opens a file picker on the USB stick; the chosen PNG / JPG / BMP / GIF is cropped to its centre square, scaled to 256 px and saved as profiles/<id>/avatar.png. "Remove avatar" goes back to the initials.
  • Dashboard focus moves up: Up from the games reaches the system tabs (Left / Right change the system, Cross or Down go back), Up again the profile (Cross opens Settings > Profile).
  • File picker (src/filepicker.c): a reusable card that browses the stick's folders (folders first, files filtered by extension, preview of the highlighted image, last folder remembered per use in picker.<id>). Previews and the caller's accept() run on a worker thread, so a 12 MP photo never blocks a frame. src/image.c holds the decode / crop / scale / atomic PNG write helpers.

Changed

  • D-pad Up / Down no longer change the system directly: they move the dashboard focus. L2 / R2 change the system from anywhere, as before.

0.12.2

Versión en GitHub

Games start again and no longer stall on a slow stick. psc-platform 2.4.1.

Fixed

  • Every game closed a few seconds after starting (retroarch exit=139) since 0.12.0: RetroArch crashed on the GET_STATUS question of lumen-buttons' watchdog. Fixed in psc-platform 2.4.1 (platform.lock), verified on the console.
  • Games on a disc image no longer stop for ~300 ms every couple of seconds on a slow USB stick. run.sh sets the kernel read-ahead of the stick to 2 MB (default: 128 KB), so the image is read ahead in long bursts instead of small reads that each took ~200 ms. Measured on the console with Bloody Roar II on a Kingston DT 101 G2: 32 stalls (11.4 s) in 98 s before, 4 stalls (1.7 s) in 130 s with the 2 MB read-ahead.

0.12.1

Versión en GitHub

Packaging only: the console runs exactly what 0.12.0 runs.

Added

  • Release manifest: lumen/MANIFEST in the zip, and lumen-psx-v0.12.1.manifest next to it (covered by SHA256SUMS), list every folder and file of the package with its SHA-256 and size. The web installer (lumen-web /install) compares it with the copy left on the stick by the previous install, downloads only the changed files as byte ranges of the zip, deletes the files a release dropped and repairs damaged ones.

0.12.0

Versión en GitHub

A boot that shows it is alive: the logo and "Loading" instead of a black screen. psc-platform 2.4.0. Verified on the console (1080p, Weston 16) on top of 0.9.1; with the 0.10.0 and 0.11.0 changes it has only run in the simulator.

Added

  • Boot: no more long black screen between Sony's animation and the dashboard. The boot splash (the logo with dark letters, the first frame of Lumen's own splash) now carries "Loading" at the bottom right with three dots that light up in turn, in the language set in Settings (boot.loading in every .lang; assets/boot/loading-<lang>[-1080].png for the boot payload, made by tools/make-boot-text.py). boot.sh keeps the payload's splash up until the compositor is swapped (the package is unpacked before, not after, stopping Sony's Weston), starts it again on the new compositor and closes it when Lumen's splash is on screen; Lumen's splash shows the same text and keeps the dots moving during the library scan. Needs the boot payload of psc-platform that ships splash.sh; with an older payload the screen stays black as before.
  • tools/sim-boot.sh: the whole boot sequence on the desktop simulator, filmed, with the black stretches listed.

0.11.0

Versión en GitHub

A more responsive dashboard, and antialiasing only where the 3D is. Measured in the simulator; not yet verified on the console. Three switches in settings.ini undo the riskier parts one by one: scene_aa=0, tile_split=0, shader_cache=0.

Changed

  • A more responsive dashboard at 1080p, same picture. The window has no multisampling any more: the launch's 3D is antialiased in its own 4x target (scene_aa=0 restores the window's MSAA) and the disc's and coin's round edges are smooth. A change of background is one pass instead of two, covers no longer make the GPU shade the background under them (tile_split=0 to compare), soft shadows are baked once per size, the settings section costs a tenth, generated backgrounds redraw 20 times a second.
  • Nothing waits for the USB stick on the render thread: the log is written by its own thread, a decoded background is uploaded a strip per frame.
  • Start-up: the library scan lists each folder once (it asked the stick for up to 12 file names per game) and the linked shaders are cached on the stick (cache/shaders, shader_cache=0 to turn it off). boot: lines in the log time each start-up phase; an empty debug/perf file adds frame times, stalls and input latency once per second.
  • Launching a game with the same graphics preset as last time writes nothing to the stick.

0.10.0

Versión en GitHub

Nintendo 64 that plays: lighter core options, a Native graphics level, and a watchdog for games that hang. psc-platform 2.3.1.

Added

  • Graphics: a third level, Native, for systems that declare it (native_720 / native_1080 in the system's [graphics]): the core renders at the display's own resolution. Nintendo 64 (960x720 / 1440x1080) and PSP (1440x816 / 1920x1088). Settings > Graphics steps Original, Enhanced, Native; systems without it keep two levels. Checked in the simulator; not yet verified on the console.
  • Nintendo 64 graphics presets (systems/n64.ini): Mupen64Plus-Next's defaults ran Super Mario 64 slow on the console. Every level now runs GLideN64 on its own thread, without colour / depth buffer copies to RDRAM, LOD emulation or hybrid filter, and dupes frames; Original is the console's own 320x240 (verified on the console: Super Mario 64 plays well, and cleaner than before), Enhanced is 640x480. Core option keys may contain -.
  • Game watchdog (lumen-buttons): a RetroArch whose main loop stopped is closed and the dashboard comes back, instead of a console that looks frozen (a hung core answers neither RESET, OPEN nor Start+Select). The daemon asks RetroArch GET_STATUS every 2 s over its command interface: 20 s without an answer (60 s for a game that never answered: core and content load before the loop starts) closes it, and RESET on a game that does not answer closes it at once. logs/buttons.log and logs/session.log say so; debug/no-watchdog turns it off. Tested under ARMv7 emulation (a core hung from the start, a game stopped mid-session, a healthy game); not yet verified on the console.
  • logs/session.log records the size of the launched content (a truncated copy is the usual reason a game never starts).

Fixed

  • Nintendo 64: a ROM that never starts (a truncated copy) no longer freezes the console (psc-platform 2.3.1: the core gives control back to RetroArch before the game's first frame).

0.9.2

Versión en GitHub

Lighter launch animations. Measured in the simulator; not yet timed on a console.

Changed

  • Launch animations: several times cheaper for the console's GPU, same picture. The solid parts of the 3D models are drawn with blending off (the PowerVR then shades each pixel once instead of every layer of every part), with their own small shader (lighting per vertex) instead of the general one, and the models ship optimised (tools/models/optimize.py: parts merged by material, 16-bit indices, decimated within 0.05 - 0.10 mm; 134,000 -> 104,000 triangles, 402,000 -> 86,000 vertices, 12.6 -> 2.3 MB to read from the USB stick at start-up).
  • The launch runs on real time down to 10 fps (it ran slow under 20 fps).
  • logs/lumen.log gets one line per launch with how it ran (launch: N frames in X s (fps), worst frame).

Fixed

  • Stripes across cartridge labels and case covers in the launch (the print fought with the paper behind it for the depth test; the depth buffer is also ten times finer now).

0.9.1

Versión en GitHub

Fixed

  • PlayStation, PSP and DVD cases: the cover art no longer shows mirrored on the inside of the booklet and through the clear case; the paper's other faces are plain paper.

0.9.0

Versión en GitHub

The real hardware in every launch: 3D models of each console, cartridge and case.

Added

  • Launch animations for every system, with the real hardware modelled in 3D (Blender, by script, from published measurements, design-patent drawings and photos measured to scale; tools/models/, no logos or lettering). Lumen loads them from assets/models/*.lmdl (src/meshes.inc) with plastic shading; a missing model falls back to a procedural one.
  • Consoles: Nintendo 64, Super Famicom / PAL Super Nintendo, Mega Drive (model 1), NES, PC Engine, Game Boy and Game Boy Advance, each with its moving parts (dust flaps, the NES door, power switches, the PC Engine's card lock, LEDs, the handheld screens).
  • Media: N64, Super Famicom, Mega Drive, NES, Game Boy and GBA cartridges, the HuCard, the PS1 jewel case, DVD and UMD keep cases, the UMD.
  • Each cartridge goes in the way it really does, as deep as it really does: N64 and Super Famicom stand in their top slot, the Mega Drive cartridge in the disc's slot, the NES cartridge slides connector first through the door and is pushed down, the HuCard lies in the PC Engine's tray, the Game Boy and GBA take it at the back and turn round to light their screen.
  • A click the moment the cartridge seats (synthesised; a firm latch on top loaders, a latch with a spring on front loaders, a small snap on handhelds), even with the music off.
  • systems/gb.ini (Game Boy / Color, Gambatte). [media] shape is read (it was ignored).

Changed

  • megadrive.ini and snes.ini declare the real cartridge proportions (109 x 70 and 128 x 87 mm); apps.ini the HuCard's.
  • Model assets are installed with the others (tools/install.sh, scripts/package.sh).

0.8.0

Versión en GitHub

Hardware-rendered cores and a CRT look, for the dashboard and the games.

Added

  • PlayStation Portable (systems/psp.ini, games in /media/games/psp: iso, cso, chd, pbp) on PPSSPP, and Nintendo 64 on Mupen64Plus-Next, both drawing with GLES 3 on the console's GPU (psc-platform 2.3.0). The release installs PPSSPP's data in retroarch/system/PPSSPP. Graphics → PSP switches 480x272 (Original) and 960x544 (Enhanced).
  • CRT filter (Settings → Display → CRT filter: Off, Soft, Strong; crt= in settings.ini): scanlines, aperture grille, slight curvature, halation and vignette. The dashboard draws through one extra GLES 3 pass (src/crt.c, MSAA kept, applied live, also on the splash, the launch animation and the in-game dialog); games get the same look from lumen/shaders/crt-lumen-*.glslp, which run.sh hands to RetroArch (video_shader_enable in the extra config, --set-shader) for software and GLES 3 cores. Launch request: new crt= line.

Changed

  • psc-platform 2.3.0 (platform.lock).

Fixed

  • In-game dialog: a slow first frame could throw the selection pill off screen (its frame step is now capped like the dashboard's).

0.7.0

Versión en GitHub

Added

  • Game menu: Start on the dashboard opens a card over the selected game with Play, Add to / Remove from favourites and Add to a folder, which drops down the folders (a check on the ones holding the game) and "New folder…" (on-screen keyboard). Favourites and every folder are rows after the systems (Favourites one press Up from the first system); they are per profile (profiles/<id>/collections.tsv) and a folder disappears with its last game. Cross still plays; the help bar shows Start = Options.
  • Save and exit: OPEN in a game adds "Save and exit" to the pause dialog. The state goes to RetroArch's slot 9 (LUMEN_RESUME_SLOT in lumen.conf), run.sh checks it was written and records the game in profiles/<id>/resume.tsv; the next Play on it asks "Continue where you left off?" (Continue loads the state with --entryslot; Start over forgets it).
  • Homebrew apps: systems/apps.ini (layout apps, /media/games/apps/<name>/app.ini) lists native programs; run.sh runs them from their folder, RESET or OPEN quit them (docs/systems.md).
  • Themes: lumen/themes/<id>/theme.ini colours plus optional fonts, glyphs, menu music and system logos, chosen in Settings → Display → Theme and applied by restarting Lumen (docs/themes.md, example dist/themes/sunset).
  • Power LED: green breathes while the dashboard is on screen, solid in a game (led=solid in settings.ini keeps it solid; an on/off-only LED gets a slow beat). The console has only green and red LEDs, so there is no blue.

Changed

  • Start no longer launches the selected game on the dashboard (it opens the game menu).
  • The restart confirmations (Display, Theme) say "Restart" instead of "Delete" and drop the profile-deletion note.

0.6.0

Versión en GitHub

The Lumen PSX brand on the console, and a boot that no longer cuts Sony's animation.

Added

  • The Lumen PSX logo (frontal LPSX, one colour per letter) at the top centre of the dashboard, entering letter by letter each time the dashboard appears; 720p and 1080p renders in assets/brand/ (tools/make-brand.py), installed by the zip and tools/install.sh.
  • Startup splash: the LPSX logo fades in with dark letters and fills them with colour, voxel row by voxel row from L to X, as Lumen loads; then it dissolves into the dashboard. The boot screen before it (assets/splash.png) stays black, so the logo shows only once.

Fixed

  • Sony's boot animation plays to the end before Lumen starts (psc-platform 2.2.1 boot payload), instead of being cut mid-way.

Verified on the console: dashboard logo, splash and boot animation.

0.5.0

Versión en GitHub

No Project Eris at all: the release zip is ready to use on any PlayStation Classic.

Added

  • Lumen's own boot payload in the zip (d8781dae-…/{diag,LDIAG.BIN}, psc-platform 2.2.0 boot/, signed in the release from a private input). Sony's USB hook runs it from the stick, and nothing is written to the console.
  • On a never-modded console it loads overlayfs and xpad as modules from RAM.
  • An empty lumen/disable-boot gives the original menu back.
  • Verified on the console: exFAT and FAT32 sticks, the hand-back to Sony's menu, a stick set up from scratch from a release zip, and a built-in game through RetroArch 1.22.
  • The zip also has lumen/logs/, an empty games/<system>/ per system, and new install instructions (FAT32 stick named SONY, unzip, plug in).

Changed

  • A stick with no games of its own lists the console's built-in games, even with show_stock_games=0, so a fresh install always has something to play.
  • boot.sh waits up to 5 s (was 1 s) for the buttons daemon. On a cold first start from FAT32 it was late, and POWER stayed disabled for that session.

Removed

  • boot/project_eris/bin/execute and the Project Eris install steps.

0.4.0

Versión en GitHub

Added

  • NES, Super Nintendo, Mega Drive / Genesis, Game Boy / Color and Game Boy Advance cores (psc-platform 2.1.0: FCEUmm, Snes9x, Genesis Plus GX, Gambatte, gpSP); NES and SNES verified on the console.
  • Cartridge launch animation: a 3D top-loading console rises and the game's own cartridge photo (<rom>-cart.png) drops into its slot, the power LED lights up.

Changed

  • Pressing Play no longer stalls: the launch work is warmed up before the animation and its clock never skips frames; less full-screen fill during the transition.
  • Game Boy Advance runs on gpSP (ARM dynarec) instead of mGBA.

0.3.0

Versión en GitHub

Project Eris' emulator stack is gone: games run on Lumen's own RetroArch 1.22 and an upstream PCSX-ReARMed, on a PSC compositor built from source.

Added

  • PSC compositor from psc-platform (Wayland 1.26 + Weston 16.0.2, atomic KMS with direct scanout), started from RAM; Sony's Weston 1.11 only if it does not start.
  • RetroArch 1.22.2 + PCSX-ReARMed from upstream; saves, states, core options and BIOS copied once from the Eris install.
  • Native KMS: when the PSC compositor cannot start, RetroArch 1.22 takes the display directly (no compositor) instead of falling back to RetroArch 1.8.8.
  • 1080p output (Settings > Display: 720p / 1080p), direct scanout: 1080p dashboard from 24 to ~58 fps.
  • First-run presentation of what changed against the stock console, with "don't show again".
  • L1/R1 change the page of games, L2/R2 change the platform.
  • PS5-style dashboard: translucent pill tabs, Outfit font, Settings as a full section, dark scrim over the art, MSAA 2x; design guidelines in docs/.
  • Console buttons: RESET restarts the game (or reloads the dashboard); OPEN pauses the game and opens a dialog: continue, quit, or, in multi-disc games, pick the disc.
  • Multi-disc games: the discs of a game folder (Game.ini Discs=, else every .cue) are given to RetroArch as one playlist, so discs can be swapped in game.
  • Crash reporter for RetroArch (lumen/debug/psc-crash.so): a crash leaves logs/crash.log.
  • Release workflow: builds Lumen, takes the pinned psc-platform release (platform.lock) and publishes the USB package with this changelog.

Known issues

  • POWER does nothing during a Lumen session: Sony's suspend to RAM goes to sleep but the session does not come back yet. Turn the console off by unplugging it (saves and states are written when a game exits). Being worked on.

Removed

  • Project Eris' RetroArch 1.8.8 and its cores (archived to backup_eris/ by the installer tools, never deleted).
  • The compositor selector (the newest working compositor is used).

Changed

  • Boot screen: plain black until the Lumen PSX mark is designed.
  • License: GPL-3.0-or-later.